Product ID:FAST CURE EPOXY MIXERCUPS, 82234
MSDS Date:01/04/1993
FSC:8040
NIIN:00N056469
MSDS Number: BWFZR

PERMATEX INDUSTRIAL

705 N MOUNTAIN RD
NEWINGTON, CT 06111
US

Emergency Phone: 203-278-1280

Info Phone: 800-641-7376

Preparer: STEPHEN REPETTO

Cage: 62377

PERMATEX INDUSTRIAL

HARTFORD, CT 06106 US

Telephone: 877-376-2839

Cage: 62377

1.68.

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (EPOXY RESIN)

CAS: 25068-38-6

RTECS: SL6475000

Fraction By Weight: 45-50%

OSHA PEL N/K

ACGIH TLV: N/K

ALUMINUM HYDROXIDE; (ALUMINUM HYDROXIDE, HYDRATED)

CAS: 21645-51-2

RTECS: BD0940000

Fraction By Weight: 45-50%

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

SILICA, AMORPHOUS (FUMED); (SILICA, AMORPHOUS TREATED)

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 1-3%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

1.4.

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

ALUMINUM HYDROXIDE; (ALUMINUM HYDROXIDE, HYDRATED)

CAS: 21645-51-2

RTECS: BD0940000

Fraction By Weight: 45-50%

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

POLYMERCAPTAN

CAS: 101359-87-9

Fraction By Weight: 30-35%

OSHA PEL N/K

ACGIH TLV: N/K

PHENOL, 2,4,6-TRIS(DIMETHYLAMINOMETHYL)-; (SUBSTITUTED

CAS: 90-72-2

RTECS: SN3500000

Fraction By Weight: 5-10%

OSHA PEL N/K

ACGIH TLV: N/K

AROMATIC HYDROCARBONS; (AROMATIC PLASTICIZER)

CAS: 70955-17-8

Fraction By Weight: 5-10%

OSHA PEL N/K

ACGIH TLV: N/K

STYRENE; (STYRENE MONOMER) (SARA III)

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: 5-10%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM;100 STEL, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

SILICA, AMORPHOUS (FUMED); (SILICA, AMORPHOUS TREATED)

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 1-3%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

15.3%.

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 1-3%

OSHA PEL 50 PPM, C (MFR)

ACGIH TLV: 50 PPM, VAPOR, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

0.47%.

RTECS: 9999999VO

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYE & SKIN IRRITANT. MODERATE TOXICITY
BY INGESTION. MAY CAUSE DERMATITIS ON PROLONGED CONTACT IN
SENSITIVE INDIVIDUALS. TARGET ORGANS & OTHER HLTH EFTS: ING
2:IRRITANT, MUTAGEN. ING 3:KIDNEY, LUNG. I NG 4:IRRITANT. ING
5:LUNG. ING 7:KIDNEY, LUNG. ING 9:IRRITANT. ING 11:BEHAVIORAL,
IRRITANT, LIVER, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE:IARC MONOGRAPHS, SUPPLEMENT, VOL
7, PG 345, 1987:GROUP 2B. ANIMAL: NERVOUS SYSTEM.
Effects of Overexposure:HLTH HAZ:MUTAGEN, NERVOUS SYSTEM, REPRODUCTIVE.
ING 12:LUNG. ING 13:DEVELOPMENTAL, IRRITANT, KIDNEY, LUNG, NERVOUS
SYSTEM, TERATOGENIC.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:INGEST:INDUCE VOMITING. OBTAIN MEDICAL ATTENTION.
INHAL:REMOVE TO FRESH AIR. IF SYMPTOMS PERSIST, OBTAIN MEDICAL
ATTENTION. SKIN:FLUSH W/WATER. EYES:FLUSH FOR AT LEAST 15 MINUTES
W/WATER. OBTAIN MEDIC AL ATTENTION.

Flash Point Method:TCC
Flash Point:>200F,>93C
Lower Limits:SEE ING 13
Upper Limits:SEE ING 13
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:SOAK UP IN AN INERT ABSORBENT. STORE IN A
PARTLY FILLED, CLOSED CONTAINER UNTIL DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE BELOW 110F TO PRESERVE SHELF
LIFE.
Other Precautions:KEEP AWAY FROM EYES. AVOID PROLONGED SKIN CONTACT.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:SUFFICIENT TO MAINTAIN VAPOR CONCENTRATION BELOW TLV.
Protective Gloves:RUBBER OR PLASTIC GLOVES.
Eye Protection:SAFETY GOGGLES.
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<5 @ 80F
Spec Gravity:SEE INGS
Solubility in Water:SLIGHT
Appearance and Odor:RESIN:WHITE PASTE; MILD ODOR. HARDENER:BLACK PASTE;
DISAGREEABLE ODOR.

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:HAZ PRODUCTS FORMED BY FIRE/THERMAL
DECOMP: IRRITATING ORGANIC VAPOR.

Waste Disposal Methods:INCINERATE FOLLOWING EPA, FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.